We recommend using WBM Stick it2it PU Adhesive. Some customers have installed by screwing to the wall.

You can watch our installation video here

The sqm per panel is 1.44sqm.

They can be cut down. We’d recommend using a handsaw or a circular saw. If using a circular saw, make sure to protect the timber slats from any potential scratches when running the saw over the panel.

If you’re creating a room divide, you will need 2 slats per vertical straight. The amount of slats really does depend on how far you need the wall to protrude and the spacing in between the slats you’d like to achieve.

We do Natural Oak, Grey and Walnut Oak.

The PET backing is fire rated, however the timber slats are not.

The fixings are sold separately.

The tracking link only works on the day of dispatch.

With our products being mostly composed of MDF, they are not suitable for outside.

Our decorative garden screens are manufactured in Preston, UK and made from a composite material. Our screens not only look amazing, they have no maintenance and will last for years.

You can fix this with adhesive, we sell Stick it 2 it which is a grab adhesive that will work excellently with the screens. These are sold separately.

We have 10 designs of 3 different sizes and 2 different colours.
We do the following sizes: 1800 x 300mm, 1800 x 600mm, 1800 x 900mm.

These come in Stone Grey or Anthracite.

Unfortunately not, as they are 6mm thick, they are best used as an aesthetic, a lot of our customers adhere the panels to walls, fencing, sheds and garages.

Yes, it is suitable for using both internal and external

It is A1 fire rated

The Tile Backer board is a multipurpose board, meaning you can use it internally or externally. If you are using it externally it is perfectly suitable to render over it.

We would recommend mechanically fixing it with screws.

You can paint straight on to the Tile Backer board, we would recommend priming it beforehand.